Parts database
Community-maintained compatibility, ratings and install difficulty. Prices are rough ranges, not quotes.
Some parts include retailer links. If you buy through them, VetteBase may earn a commission at no cost to you. It never affects ratings. Affiliate disclosure
A glycol-based, high-boiling-point fluid for spirited and track driving. Confirm it meets the fluid type listed in your owner's manual before use.
High-temperature front and rear pads for HPDE use. More fade resistance than street pads, with more noise and dust when cold.
A consumer-grade ceramic coating kit for paint, wheels and trim. Paint must be fully cleaned and decontaminated first for best results.
An automatic charger and maintainer with an AGM mode and a quick-connect pigtail. Safe to leave connected for long-term storage.
A handheld programmer for loading tunes and reading codes. Gains depend on the tune and supporting mods. Check emissions legality before tuning a street car.
Front and rear hollow anti-roll bars with multiple adjustment holes, plus bushings and end links. Reduces body roll for street and autocross use.
A non-run-flat summer tire set for street-driven Corvettes, with a focus on dry and wet grip. Plan for a sealant and inflator kit, as this tire is not a run-flat.
Four rubber pucks that fit the factory lift points, so you can raise the car without damaging the frame rails or rocker panels.
Shortens shifter travel and tightens the feel of the rear-mounted six-speed manual. Expect slightly higher shift effort than stock.